Before we start, you need to be careful when cleaning your metal signboard prints. We would hate for you to choose the wrong solutions and techniques and end up damaging your print. Our cleaning tips will ensure your metal print stays untouched. The only how to clean your metal prints properly is by using streak-free cleaning solutions, non-abrasive cloths, and by swiping from the middle of the print to the outer edges. Make sure you read each direction carefully and clean delicately:
Cleaning Solutions
When choosing the right cleaning solution, the most important thing to consider when selecting a solution of your choice is to use one that will not cause any damage to your image or metal. The top non-damaging solutions are listed below:
1. Water: Water it the most inexpensive and easiest solution for cleaning the surface dirt right off the metal print. However, water is not perfect, it tends to leave streaks. On the bright side, you won’t need to run to the store or spend any money.
2. Glass Cleaner: Choosing any brand of streak-free glass cleaner works effectively for cleaning metal. It is extremely efficient in removing fingerprints or smudges.
3. Isopropyl alcohol (rubbing alcohol): By adding a small amount of rubbing alcohol with a non-abrasive cloth will help clean the fingerprints right off the metal print. The alcohol is streak free and is the most successful cleaner when it comes leaving your print extremely shiny and looking brand new.
Solutions Don’ts
Do not try other solutions that are not listed above because most other types are harmful to the metal print. Avoid using common cleaners such as bleach or any heavy-duty cleaning solutions. We highly recommend using Windex.
Cleaning Cloth
When selecting the right type of cloth, you need to keep in mind to choose one that will not smudge the print or leave particles behind. The best kind of cloths to choose from is microfiber and lint-free cloths because they are made specifically to not leave particles behind. These cloths will usually say “non-abrasive”, and they can easily be found at your local supermarket or general store. We suggest using new towels because used towels could have little bits of debris that could scratch the surface of your print.
The Technique
The technique is quite simple and easy to learn. First, you want to start by dipping your cloth lightly into the cleaning solution of your choice. To avoid saturating the cloth you can use a spray bottle to lightly mist the towel. Use the cloth by starting from inner of the print and move towards the outer edges. This will ensure all the hard-to-remove dirt is gone without leaving any streaks.
Why You Should Clean Them
Ultimately, you want to clean your signboard and signage metal prints because they will look much more professional, clean and more visible. You always want your prints to look clean, so your brand image is strong and presentable to your customers.